Self Shine Color Dye Kit

Water based dye, combined with a soapy liquid that prepares the leather before applying the dye. Changes the colour evenly from black to white. Repairs scuffs and scratches. Fast drying and leaves a self shine finish. Suitable for leather, canvas and synthetic leather.

How to use:

Preparation

◉ Leather: Rub with a used green scrubbing fiber (ex. Scotch Brite) or a cloth soaked in Tarrago Preparer.
◉ Synthetic Leather: Apply Tarrago Preparer with a soaked cloth over the surface.
◉ Canvas: Wash the shoes with water and soap. Apply one or two coats of COLOR DYE before being totally dry, following the instructions to dye leather shoes.

Dyeing or Restoring Color

Leather or synthetic leather:

1. Stir the dye container with the application brush until the color is completely homogeneous.
2. With the application brush semi-drained, apply a small amount of product to a sponge and paint the joint between sole and leather, sewn, scrapes, trim pieces, etc.
2.2. Place one or two coats of dye on one end of the sponge. Rub gently in a circular way over the entire area, adding another coat of product if necessary. Repeat this process until the sponge is nearly dry. Without adding more dye, you can tap with the same sponge over the surface dyed to match the color, without attempting to cover transparencies. Once dry the 1st layer, apply a second one following the same process to match the color. Apply a third coat if necessary.
3. Once finished dyeing, rinse the sponge and the brush with water to avoid them to dry out. Optimal drying time is 12 hours